To prepare a USB stick for installing Linux using Rufus on a Windows computer, begin by downloading the latest version of Rufus from its official website and acquiring the .ISO file of your desired Linux distribution. Ensure you have a USB flash drive with at least 8GB of capacity, as the process will completely erase all existing data on the device.

Preparation and Configuration
Insert the USB drive into your computer and launch Rufus, which is a portable application that does not require installation. In the Device dropdown, select your USB stick to ensure you are targeting the correct drive. Click the SELECT button to browse for and choose the downloaded Linux .ISO file. Rufus will typically auto-configure the Partition scheme (choose GPT for UEFI systems or MBR for BIOS/Legacy systems) and File system (usually FAT32 or NTFS); if unsure, leave these on their default settings, which Rufus optimizes automatically.

Writing the Image
For most Linux distributions, keep the write mode set to ISO Image mode, which is the recommended default. However, if you are installing RHEL, Rocky Linux, or AlmaLinux version 8.3 or later, you must switch to DD Image mode to prevent installer errors. Click START to begin the process; Rufus will warn you that all data will be destroyed, so confirm with OK. Wait for the progress bar to complete and the status to read READY, then close the application and safely eject the USB stick.

Booting the System
Insert the prepared USB drive into the target computer and restart it. Access the Boot Menu (commonly by pressing F12, F2, or Del during startup) and select the USB drive as the boot device. The computer will boot into the Linux live environment, allowing you to test the OS or proceed with installation.